在我們常見的粗線徑繞線機中主軸動力機構一般都是配置有減速機構來增加設備的主軸力矩和降低轉速，日常繞線機維護項目中對減速機構的檢修項目是最為重要的設備檢修環節之一，它的可靠程度直接影響到設備正常運行。

The bold line our common diameter winding machine spindle power mechanism is usually configured to increase the shaft torque equipment and reduce speed reducer, daily winding of reducer overhaul project machine maintenance projects is one of the most important equipment maintenance, reliability of it directly affects the normal operation of equipment.

硅鋼片縱剪線通常繞線機主軸動力機構的維護要點一般由以下幾點：

Maintenance of spindle power mechanism is usually winding machine generally consists of the following:

一、判斷主軸動力機構的溫升是否正常、回轉軸承是否有漏油等情況。

A spindle power mechanism, determine the temperature rise is normal, whether there is oil leakage of rotary bearing.

二、檢測主軸轉動的順滑程度，齒輪間隙是否正常。

Level two, detection of the spindle rotation smooth, gear clearance is normal.

三、硅鋼片縱剪線測量主軸的跳動值是否在正常的范圍之內，軸承磨損是否正常。

Three, measurement of spindle runout values are within normal range, bearing wear is normal.

在對繞線機作以上各項目的檢測后就可以基本判斷主軸的工作情況是否正常，對于出現的問題及時的修復和排除，可以降低主軸故障發生率以及延長繞線機的工作壽命，使繞線機等設備發揮其最大的效率。

The winding machine for detecting various projects can work basic judgment spindle is normal, to fix the problems timely and exclusion, can reduce the failure rate and prolonging the working life of the winding machine, winding machines and other equipment to play the greatest efficiency.